Description
Discover the JAKCOM CDS replicator, the ideal companion for your R5 smart ring. With its innovative technology, this replicator lets you quickly and easily reproduce your favorite CDs, so you can listen to them with your smart ring. Enjoy a limitless musical experience with the JAKCOM CDS replicator.
Product presentation
The JAKCOM CDS replicator is a special reader-recorder that can replicate IC and ID proximity cards in the R5 smart ring.
Structure description
A. IC card read/write area B. IC card read/write area C. Indicator light D. USB cable socket E. Read button F. Write button G. Power switch H. IC card read/write area 1. Indicator light 1 J. Indicator light 2 K. Charging socket
Applicable card type :
IC cards: Class A and B cards with a carrier frequency of 13.56 MHz and ISO-14443 compliance, such as MIFARE (Classics, DESFire), M1, S50, UID, CUID, FUID, UFUID, etc. ID cards: Proximity cards with 125 kHz carrier frequency, conforming to the identification standard and containing only the card number, such as EM4305, 5200, 8800, T5577, ZX-F08, etc.
Introduction to the replicator :
1. The CD2 replicator can replicate the IC card on IC module 1 or 2 of the R5 ring. 2. the CD2 replicator can replicate the ID card on the n°1 identification module of the R5 ring. 3. the ID2 replicator can replicate the ID card on the n°2 identification module of the R5 ring.
Replace the IC card on the R5 ring
1. Use the CD2 data cable to connect the CD2 replicator to the Windows system computer, and the indicator is red. 2. open the newly created “USB disk” on your computer 3. double-click to download the operating program for the corresponding language ; 4. Unzip the downloaded file, then open the operating program ; 5. Place the target IC card on the IC card reading area, the indicator turns green, then click on “Start decoding”; 6. After successful decoding, remove the target IC card, wait for the indicator to turn red and then click on “Start decoding”. ; 7. Place IC module n°1 or n°2 of the R5 ring on the reading area of the IC card, and the indicator turns green. ; 8. Click on “Write card”, wait for the card to be successfully written, then the IC card is replicated.
Replicate the ID card on ID module #1 of the R5 ring.
1. Use the CD2 replicator and the start-up and connection process is the same as above. 2. place the target ID card on the ID card reading zone and the indicator turns green Click on the “LF Card” label page, then click on “Read”; 4. After a successful read, remove the target ID card and wait for the indicator to turn red. ; 5. Place identification module n°1 of the R5 ring on the ID card reading zone and the indicator turns green. ; 6. Click on “Write”, wait for the card to be successfully written, then the ID card is replicated.
Replicate the ID card on ID module no. 2 of the R5 ring.
1. Use the ID2 USB cable to connect the ID2 replicator to the USB power supply. 2. turn the ID2 replicator switch to “ON” and indicator 1 turns blue 3. place target ID card on ID card reading zone ; 4. Press the “R” key to play. If reading is successful, indicator 2 turns green ; 5. Place the n°2 identification module of the R5 ring on the reading zone of the ID card ; 6. Press the “W” key to write. If writing is successful, indicator 2 will flash and remain green. ; 7. If writing fails, indicator 2 will go out, so you’ll need to read the target card and try writing again. ; 8. After use, turn the ID2 replicator switch to “OFF” and indicator 1 will go out.
FAQ
1. If the CD2 connection fails, try replacing a computer, replace a USB cable and try again. 2. if IC card decoding fails, increase the “standard” level, then try decoding again; if the decoding time is too long (over 5 minutes), please confirm whether the target IC card is an M1 proximity card. If it’s another high-capacity card or a CPU card, it can’t be decoded (for example, a bank card, a bus card or another card involving funds); CPU cards can be replicated via the “Card number” button to test whether they can be used in non-paying areas (such as access control, elevator, etc.). 3. if the IC card cannot be written to the ring, first decode the ring’s IC module, then click on “Format card” to format the ring’s IC module and replicate the card again after execution.
Specification parameters
Carrier frequency: 13.56 MHZ, 125 KHZ RF distance: 1 ~ 3 cm Host material: ABS Operating systems applicable to CD2: Windows 7/8/10/11 version and Windows Server in the same period CD2 interface type: Type-C ID2 interface type: MicroUSB
Contact details
a) Website: Http://www.JAKCOM.com b) E-mail: service@JAKCOM.com c) Service telephone: +86 400 806 7311, +86 0351-4383818 d) Operating hours: 9:00 am – 9:00 pm GMT+8 e) Address: 1-102, no. 26, Shuangta East Street, Yingze District, Taiyuan City, Shanxi Province, China f) Contact: Technologie JAKCOM
Packaging
White inner box: G.W. unit weighs approx. 110 g, unit size 13 cm x 8.5 cm x 4 cm; Brown outer box: G.W. unit weighs approx. 11,670 g, unit size i.
